210RRB6
Technical specifications
| D | Outside diameter | 3.5433 inch |
| kg | Mass | 1.76 lbs |
| Co | Static load rating | 23.2 kN |
| Co | Static load rating | 5213 lbs |
| Cdyn | Dynamic load rating | 35 kN |
| Cdyn | Dynamic load rating | 7870 lbs |
| a | Shaft size | 38.12 mm |
| a | Shaft size | 1 1/2 inch |
| d1 | Outer diameter inner ring | 62.5 mm |
| d1 | Outer diameter inner ring | 2.461 inch |
| C | Width outer ring | 22 mm |
| C | Width outer ring | 0.866 inch |
| B | Width inner ring | 30 mm |
| B | Width inner ring | 1.181 inch |
| D | Outside diameter | 90 mm |
| kg | Mass | 0.8 kg |
S SEAL / S SEAL (2S)
Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.
Cross references
| JOHN DEERE | A-HPS108GPB |
| BCA | HPS108GPB-I |
| PEER | G210KPPB2 |
| FAFNIR | 210RRB6 |
| INA | 210RRB6 |
| TIMKEN | BP13043A |
| NTN | SBX10-A02.LLM |
| INA | 210KRRB.AH02 |
| JOHN DEERE | AE42880 |
